Dưới đây là những mã lỗi thường gặp ở máy in brother, bằng nguyên bản tiếng Anh, mình sưu tầm được và chia sẽ lại. Nên mình để nguyên bản tiếng Anh, các bạn có thể đọc nếu không hiểu có thể nhờ anh GOOGLE dịch giúp nhé !!!

Mã lỗi: Error Code: 54
Diễn giải: replace fuser unit: The fuser unit has reached the end of it's life cycle.
Cách xử lý: Worn fuser units can cause poor quality print paper jams. The fuser unit needs replacing and the counter resetting.
Mã Lỗi: Error Code: 55
Diễn giải: Replace laser unit: The laser unit has reached the end of it's life cycle.
Cách xử lý: Worn laser units can cause poor quality print. The laser unit needs replacing and the counter resetting.
Mã Lỗi: Error Code: 57
Diễn giải: Paper Jam in the Duplex Unit: The paper has jammed while double sided printing.
Cách xử lý: Check for paper in the duplex unit and remove. If problem persists, the rollers in the duplex unit may need replacing or the duplex switch solenoid may be faulty.

Mã Lỗi: Error Code: 5E
Diễn giải: Replace the belt unit: The transfer belt has reached the end of it's life cycle
Cách xử lý: Worn transfer belts can cause poor quality print and paper jams. The belt should be replaced end the counter reset.

Mã lỗi: Error Code: 68, 69, 6A, 6B, 6C, 6D, 6E, 6F
Diễn giải: Fuser Unit Failure: These codes all apply to the fuser unit. Too hot, not hot enough, not heating up at all.
Cách xử lý: Switch the printer off and back on again. If the error still persists, the fuser unit will need replacing.

Mã Lỗi: Error Code: 7D
Diễn giải: Dirt on the Drum Unit: The printer is detecting that there is dust in the drum area of the machine.
Cách xử lý: Dirt on the Drum Unit: The printer is detecting that there is dust in the drum area of the Follow the drum area cleaning section in the user guide. If the error remains then you will need an engineer to do more in-depth cleaning.
Mã Lỗi: Error Code: CF
Diễn giải: Waste Toner Box Full: While printing the machine generates a quantity of waste toner. This is collected in a container which is now full.
Cách xử lý: Follow the waste toner box replacement section in the user guide. If it is still indicating that the new box is full, the waste toner sensor may be faulty.

Chủ đề cùng chuyên mục: